Overview
This pixel protocol was designed by Power MOS Microelectronics (formerly DMS Microelectronics) in China. It offers a backup data line for redundancy in case of a chip failure. The control circuit comes in a ESOP8 package, allowing for more flexibility with LED choice.
Specifications
PixLite Mk1 | |
PixLite Mk2 | |
PixLite Mk3 | |
Clock Type | Data-Only |
Color Resolution | 8 Bits |
Current Control | |
Physical Package | ESOP8 |
RGB | |
RBGW | |
Input Voltage | 5V |
Output Pixel Voltage | 5-17V |
PWM Rate | 1600Hz |
Suitable Camera | Up to 53fps |
Data Transfer Rate | 800kbps |
Redundant Data Line |
Considerations for Use
Advantages
- High PWM rate allows for filming these pixels with cameras up to 53fps
- Redundant data line reduces chance of entire strip failure
Disadvantages
- Data-only restricts refresh rates to be limited by the speed of the protocol, which can be slow
- Only 8 bits of data for each color makes dimming curves less smooth
PixLite Support
Are you looking for P9883 pixel drivers that work with Art-Net or sACN?
All PixLite Mk3 products support P9883 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.
PixLite® A4-S Mk3
Driving up to 24 universes of data, and offering easy mounting, sleek design and electrical fault protection — what’s not to love?
PixLite® E4-S Mk3
The E-series LED pixel controller is made for tighter budgets thanks to its ability to drive up to 24 universes of LED pixel control and route power directly to LEDs.
